Finer Pack

A starting size for your beauty box.

Measure the filled bottle or jar, choose a clearance and calculate the internal space. Use the result to start a structural discussion before requesting a production dieline.

Measure your filled product.

Use its widest points, including cap, pump and any protruding parts. For a round bottle, enter the diameter as both length and width.

Measurement unit

The starting 2 mm per side is an editable planning assumption. Add insert and cushioning space after structural review.

Your starting internal size.

36.0 × 36.0 × 94.0mm · length × width × height

1.417 × 1.417 × 3.701 in

Internal size = product size + twice the clearance on each axis. Results round up to 0.1 mm.

This is a single-product sizing brief. Board thickness, folds, inserts and transit cushioning change the production dimensions. A rigid gift box still needs appropriate outer shipping protection.

Next sample: ask for a structural fit sample using the filled product, then confirm print and finish samples. Material grade, MOQ, sample cost and timing are quoted after review.

Review this brief on WhatsApp ↗Use the full project inquiry →

What should you approve before a dieline?

A size estimate describes an internal cavity, not a cutting pattern. Approve container fit, removal access, insert geometry and closure movement with a structural sample. Review the complete packed system for its delivery route.

Compare box structures →Plan your samples →